Part Description	Part Number	WPC	WPC95	Gtb Sys3	NTE Cross
62v Zener Diode	1N4759A	D3	D2	VR1	149A
56v Zener Diode	1N4758A	D4*	D1	VR2	5090A
56v Zener Diode	1N4758A	D5*	D18	VR3	5090A
12v Zener Diode	1N4742A	D6	D3	VR4	142A
12v Zener Diode	1N4742A	D8	D5	VR5	142A
1.0A 400v Diode	1N4004	D7	D4	D9	116
NPN Transistor	2N3904	Q1	N/A	N/A	123AP
NPN Transistor	2N5551 or MPSD02	Q2	Q2	Q2	287
NPN Transistor	MJE15030	Q3	Q1	Q5	54
PNP Transistor	2N5401 or MPSD52	Q4	Q4	Q3	288
PNP Transistor	2N5401 or MPSD52	Q5	Q5	Q4	288
PNP Transistor	MJE15031	Q6	Q6	Q7	55
NPN Transistor	MJE15030	Q7	Q7	Q6	54
NPN Transistor	2N5551 or MPSD02	Q10	Q3	Q1	287
Resistor	120 Ohm 1/2W, 5%	R4	R30	R17	x
Resistor	120 Ohm 1/2W, 5%	R5	R31	R16	x
Resistor	47k Ohm 1/2W, 5%	R3	R25	R15	x
Resistor	47k Ohm 1/2W, 5%	R6	R26	R13	x
Resistor	47k Ohm 1/2W, 5%	R12	R27	R14	x
Resistor	47k Ohm 1/2W, 5%	R13	R29	R12	x
Resistor	56 Ohm 1/4W, 5%	R7			x
Resistor	4.7K Ohm, 5W, 5%	R8	R43	R18	x
Resistor	1.8K Ohm,5W, 5%	R9	R44	R19	x
Resistor	120 Ohm, 5W, 5%	R11	R28	N/A	x

* Older versions of the DMD controller board use 1N5759 (62 volt).
On these boards, better to use the lower voltage 1N5758 (56 volts).

120 ohm = Brown, Red, Brown
47k ohm = Yellow, Violet, Orange

Back to the WPC Pinball Repair Guide.
Back to Marvin's Pinball Repair documents.